Product Description & Features
• Centering arm with adjustment screws in faces of door
• Built-in positive dead stop prevents door from swinging beyond the
desired opening degree (90°)
• Separate and independent valves for closing speed, latch speed and backcheck
• Selective hold open (S) at same degree as dead stop
• Delayed action option – prefix “DA” (non-hold open closers only)
• Models available to meet ICC/ANSI A117.1 low opening force requirements, prefix “PH”.
(For 8-1/2 lbs. of opening force prefix “PH” and suffix “8-1/2 lbs.”)
• Cold weather fluid option – specify “CWF” (not available for closers with “DA”)
• Sealed closer option – specify “SC”
• Available with floor plate or threshold installation (floor plate shown)
• Cycolac, rustproof cement case
• Arm reinforcement bracket for wood doors – prefix “W”
• Standard top pivot: #340 included
• Not allowed for fire rated doors
• Frame stop required on the header at the lock side. If not supplied by frame manufacturer,
recommend use of 60131
• Furnished with wood and machine screws
• Extended spindles available in 1/2” increments up to 2” longer than standard
Application
• Single Acting, Handed
• Exterior or Interior Doors
• Weight to 350 lbs.
• Centering Arm
• Sizes up to 4’0”x8’6”*
(1219mmx2591mm)
Product Description & Features
• Centering arm with adjustment screws in faces of door
• Built-in positive dead stop prevents door from swinging beyond the
desired opening degree (90°)
• Separate and independent valves for closing speed, latch speed and backcheck
• Selective hold open (S) at same degree as dead stop
• Delayed action option – prefix “DA” (non-hold open closers only)
• Models available to meet ICC/ANSI A117.1 low opening force requirements, prefix “PH”.
(For 8-1/2 lbs. of opening force prefix “PH” and suffix “8-1/2 lbs.”)
• Cold weather fluid option – specify “CWF” (not available for closers with “DA”)
• Sealed closer option – specify “SC”
• Available with floor plate or threshold installation (floor plate shown)
• Cycolac, rustproof cement case
• Arm reinforcement bracket for wood doors – prefix “W”
• Standard top pivot: #340 included
• Not allowed for fire rated doors
• Frame stop required on the header at the lock side. If not supplied by frame manufacturer,
recommend use of 60131
• Furnished with wood and machine screws
• Extended spindles available in 1/2” increments up to 2” longer than standard
Application
• Single Acting, Handed
• Exterior or Interior Doors
• Weight to 350 lbs.
• Centering Arm
• Sizes up to 4’0”x8’6”*
(1219mmx2591mm)