Heavy Duty Commercial Mortise Locks
Features:
• Non Handed
• Stock 6 pin Schlage “C” keyway, drilled for construction keying
• Door thickness 1-3/4” standard, other thicknesses
available when specified
• Backset 2-3/4 “
• Lock case Heavy gauge plated steel
• Armored Front Wrought stainless steel or brassadjustable
angle and attached by
screws to the lock case front
• Dead bolt 1” throw, stainless steel with
hardened anti-saw pins
• Latch bolt Stainless steel latch and anti-friction
insert
• Guard bolt Stainless steel
• Stop works Push buttons- chrome plated brass
• Strike Stainless steel or brass, 4-7/8” x
1-1/4” curved lip ANSI strike
• Handing Handed, reversible in field
• UL Listings UL listed, 3 hour fire doors, single
and pairs
• ANSI Specification Meets all Grade 1 security,
operational, dimensional and cycling
requirements of ANSI/BHMA A156.13
Series 1000, Lock body conforms
to Federal Standatd FF-H-106 Type 86/87
Specifications:
Mortise Locks – ML series.
All locks or latches are provided with 3 hour listed stainless steel dead
latch or spring latch. Lock chassis shall be stainless steel, steel bar
and cold rolled steel case with ball-bearing roller retractors.
Options:
• Trim: 06, 17, 03, specify “A” for sectional trim
• Finish: US26D
• Available with “clutch type” lever, Specify ML “C”.
Note: Different template required.
Clutch only available with 06 lever.
CODE COMPLIANCE:
• ANSI A156.13 Series 1000 Grade 1
• Listed UL10C and UBC 7.2 for positive pressure.
• ANSI A117.1 ADA Barrier-free Accessibility
• C-UBC California Uniform Builders Code -2001
• NFPA-80 National Fire Protection -1999
• NFPA-101National Fire Protection-Life Safety-2000
LIMITED LIFETIME WARRANTY
Features:
• Non Handed
• Stock 6 pin Schlage “C” keyway, drilled for construction keying
• Door thickness 1-3/4” standard, other thicknesses
available when specified
• Backset 2-3/4 “
• Lock case Heavy gauge plated steel
• Armored Front Wrought stainless steel or brassadjustable
angle and attached by
screws to the lock case front
• Dead bolt 1” throw, stainless steel with
hardened anti-saw pins
• Latch bolt Stainless steel latch and anti-friction
insert
• Guard bolt Stainless steel
• Stop works Push buttons- chrome plated brass
• Strike Stainless steel or brass, 4-7/8” x
1-1/4” curved lip ANSI strike
• Handing Handed, reversible in field
• UL Listings UL listed, 3 hour fire doors, single
and pairs
• ANSI Specification Meets all Grade 1 security,
operational, dimensional and cycling
requirements of ANSI/BHMA A156.13
Series 1000, Lock body conforms
to Federal Standatd FF-H-106 Type 86/87
Specifications:
Mortise Locks – ML series.
All locks or latches are provided with 3 hour listed stainless steel dead
latch or spring latch. Lock chassis shall be stainless steel, steel bar
and cold rolled steel case with ball-bearing roller retractors.
Options:
• Trim: 06, 17, 03, specify “A” for sectional trim
• Finish: US26D
• Available with “clutch type” lever, Specify ML “C”.
Note: Different template required.
Clutch only available with 06 lever.
CODE COMPLIANCE:
• ANSI A156.13 Series 1000 Grade 1
• Listed UL10C and UBC 7.2 for positive pressure.
• ANSI A117.1 ADA Barrier-free Accessibility
• C-UBC California Uniform Builders Code -2001
• NFPA-80 National Fire Protection -1999
• NFPA-101National Fire Protection-Life Safety-2000
LIMITED LIFETIME WARRANTY